Firewall
The Firewall feature allows you to restrict access to your pod by creating an allowlist of IP addresses. This effectively blocks all connections from IPs not listed in the Firewall tab before they reach your pod.
Enabling the Firewall
Section titled “Enabling the Firewall”- Open Pod Settings and then the Firewall tab.
- Add the IP addresses that should be able to reach your pod. You can look up your own external IP.
- From now on, only the listed IPs can connect.
Access Issues
Section titled “Access Issues”Our servers support both IPv6 and IPv4. Usually, IPv6 will be preferred by modern networks. If you experience access issues:
- Confirm you have added both your external IPv4 and IPv6 addresses.
- Ensure you are only using IPv4 if you only added an IPv4 address.
Support Access
Section titled “Support Access”Our support team is not able to disable or bypass the firewall feature. If you need support to inspect your pod, you must disable the feature first.
Disabling the Firewall
Section titled “Disabling the Firewall”To fully disable the firewall feature, remove all listed IPs in the Firewall tab.